National Forum on Maintenance 2009

International conferenceheld under the patronage of the Slovak Ministry of Economy
PHOTODOCUMENTATION

General
partner:

Main partnes:

Partners:

Professional Guarantors:	Conference Preparatory Committee:
Václav Legát Juraj Sinay Peter Zvolenský	Michal Abrahámfy Dušan Belko József Csiba Gabriel Dravecký Juraj Grenčík Jozef Hrubec Vendelín Íro Vladimír Mataj	Krzysztof Olejnik Hana Pačaiová Marko Rentka Vladimír Stuchlý Ivan Ševčík Zdeněk Votava Michal Žilka

CONFERENCE TOPICS:

Best practices in maitnenance management
Information systems and maintenance support
Advanced maintenance techology
Predictive maintenance and diagnostics
Safety and Special Topics

Conference languages: Slovak, Czech, English - interpreting

Photos from the conference

Tuesday, 26 May 2009

Conference venue - hotel PATRIA - May 2009

Conference opening - conference chairfrom the left: Vladimíra Mataj - SPP distribúcia, converence gerneral aprtner representative; Václav Legát - ČSPÚ president, CZ; Vendelín Íro - SSU vice-chairman; Juraj Grenčík - SSU chairman; Dušan Belko - Slovenské elektrárne, a.s.; Peter Zvolenský - University of Žilina; Krzysztof Olejnik - PNTTE representative, Poland

Conference opening - Vendlín Iro - SSU vice-chairman

Conference opening - Václav Legát - ČSPÚ (Czech Maintenance Society) president, CZ

Conference opening - Krzysztof Oljenik - PNTTE (Polish Maintenance Society) representative OtvorenieOlejnik

Conference opening - Peter Zvolenský - University of Žilina, professional guarantor

Conference opening - Juraj Grenčík: Maintenance - means to release impacts of crisis

SSU award "Mainteiner of the year 2008" - Ing. Csaba Majoroš,eustream, a.s.

SSU Master Thesis award - Bc. Martina Barošová, STU MTF Trnava

Conference auditorium

Martina Barošová, STU Bratislava, MTF Trnava; master thesi topic: Proposal for rationalisation of maintenance and repair activities

Csaba Majoroš, eustream, a.s.: Increase of transport capacity flexibility of compressor station No.1 Veľké Kapušany

Vlastimil Mäčko, ARI-Armaturen Albert Richter GmbH & Co. KG, D: ARI-Armaturen - outlets of condensate

Martin Varga, SEPS spol. s r.o., Bratislava: Repairs of detected pipes defects without interruption of operation

Michal Abrahámfy, Slovcem, spol. s r.o., Malacky: Belzona - solution for repair and maitnenance problems

Václav Legát, CZU TF Praha, CZ: Maintenance resources and their optimising

Christian Dvorak, EFM Consulting AG, A: Modern technical Asset Management with EBAV® (Experience-Based Asset Valuation)

Gabriel Dravecký, Pivovary Topvar, a.s.: Actual application of industrial engineering methods in technological maintenance in Pivovary Topvar brewery for continuous improvement of high production quality

Branislav Kyseľ, U.S.Steel Košice, s.r.o.: Ten types of energy loses

František Helebrant ,VŠB – TU Ostrava, CZ: Process-techological activity - maintenance

Roman Fabian, REIMANN s.r.o.: ECO-nómia v údržbe

ECO-nomy in maintenance - electromobile

Petr Přikryl, IDS Scheer ČR, s.r.o.,CZ: Maintenance, software and moderns organisation in the year 2009

Oldřich Kuboň, Systémy-Ratech, s.r.o.: ASSIK - Information system for support of quality of nuclear power stations equipment

Miroslav Šándor, Inseko, a.s.: Green initiative – innovation in EAM systems area

Vladimír Ščípa, Sfera, a.s.: Utilisation of knowledge systems in planning of energy equipment maintenance

Jozef Tóth, Bently Nevada Slovakia s.r.o., member of GE Energy: Importance of predicitve maintenance in changed economic circumstances, new trends in maintenance support

József Csiba, Hungarian State Railway, HU: International Tendencies in the Maintenance of Railway Vehicles

Ondrej Valent, CMMS, s.r.o.: Savings ina company by implementation of proactive predictive maintenance. Why it does not work in your company?

Jaroslav Zajíček, Technická univerzita v Liberci, CZ: Some fragments of RCM process

Andrej Červeňan, STU SjF/ Koordinačne centrum odborneho vzdelavania, SK: Training of maintenance personnel

Hana Pačaiová, TU Košice : New standards and their role in maintenance management

Miroslav Rakyta, ŽU, SjF, KPI, Žilina: TPM - concept for reduction of losses and maintenance process costs

Vladimír Stuchlý, ŽU, SjF, KDMT, Žilina: Reliability methods in creation of maintenance systems

Conference Dinner

Wednesday, 27 May, 2009

Roman Richter, SLOVALCO, a.s., Žiar nad Hronom: Quality, reliability and technical diagnostics of technological system in continuous operation

Viera Peťková, eustream, a.s.: Effective control of energetic equipment by „walking information“

Roman Jedlička , SE AE Jaslovské Bohunice: Diagnostic measurements during increse of power of production equipment of Nuclear power station V2

Dušan Belko, SE AE Jaslovské Bohunice: Repairs of sockets on HRK reactors in SE EBO

Vladimír Hájek, Bruel&Kjaer: Protection and diagnostics of machines - important step in production safety improvemnt

Adam Bojko, ADASH, CZ: Predictive maintenance managemetn and condition monitoring of machines

Vladimír Oravčík, SKF Slovensko, spol. s r.o.: New products, new trends

Pavol Kováč, VTS Slovnaft: Diagnostic methods for increase of operational reliability of machinery

Karel Bojas, WOMA - PRAHA, CZ: Water as a tool

Vladislav Chvalina, KLEENTEK Slovakia, s.r.o.: Care for oil = resource for profit, chapter 2

Roman Hutta, Spirax-Sarco: Effective operation of steam systems

Róbert Berky, Ibok, a.s.: Durability assessment of autoclave

Martin Vitásek, Ibok, a.s.: Welding during repairs and rennovations

Vladislav Hynek, Alfa Laval, s.r.o., CZ: Use of high-speed centrifuges in practice

Krzysztof Olejnik, Motorisation Commision of the Polish Maintenance Society, PL: Managing of the safety at the sources of motor transport

Gabriel Nowacki, Motor Transport Institute, PL: The functional structure of The National Automatic Toll Collection System in Poland

Jan Kamenický,Technická univerzita v Liberci ,CZ: Is "k of n" connection really the best?

Josef Chudoba,Technická univerzita v Liberci ,CZ: Determination of dynamic reliability parameters of multi state systems by use of the Monte-Carlo method

Company exhibits

Company exhibits

Záver

Conference closing - ballot of enquiry forms

Conference closing - 2nd prize

Conference closing - winner

Conference closing - thanks to participants and organisers, invitation to coming events

Thursday 28 May, 2009

Accompanying programme:

Seminár : Maintenance and safety - Hana Pačaiová, TU Košice

Workshop: Workshop: Maitneance benchmarking EFNMS – harmonised indicators EN and SMRP - Juraj Grenčík, SSU / ŽU; Vendelín Iro, SSU

Pictures for the High Tatras 2009

Štrbské pleso - early morning

Štrbské pleso - classic

Štrbské pleso with Kriváň in the background

Raod to Štrbské pleso - 5 years after devastating wind

Final programme:

Tuesday, 26 May, 2009

7.00 - 8.30	Registration
8.30 - 9.10	Conference Opening
	Opening addresses
	Juraj Grenčík, SSU & KDMT, SjF, ŽU Žilina, SK, Maintenance - means to release impacts of crisis
	SSU award "Maintainer of the year"
	SSU award for "Master thesis"

9:10 - 10:25

Advanced maintenance techology

9:10 - 9:30	Csaba Majoros, Eustream, a.s., SK: Increase of transport capacity flexibility of compressor station No.1 Veľké Kapušany
9:30 - 9:45	Vlastimil Mäčko, ARI-Armaturen Albert Richter GmbH & Co. KG, D: ARI-Armaturen - outlets of condensate
9:45 - 10:05	Jan Vytřísal, SEPS spol. s r.o., Bratislava, SK: Repairs of detected pipes defects without interruption of operation
10:05 - 10:25	Michal Abrahámfy, Slovcem, spol. s r.o., Malacky, SK: New possibilites of maintenance repairs in difficult conditions

10:25 – 11:00

Coffee break

11:00 - 13:00

Best practices in maitnenance management

11:00 - 11:20	Václav Legát, CZU TF Praha, CZ:, Maintenance resources and their optimising
11:20 - 11:40	Christian Dvorak, EFM Consulting AG, A: Modern technical Asset Management with EBAV® (Experience-Based Asset Valuation)
11:40 - 12:00	Gabriel Dravecký, Pivovary Topvar, a.s., SK: Actual application of industrial engineering methods in technological maintenance in Pivovary Topvar brewery for continuous improvement of high production quality
12:00 - 12:20	Ján Petko, Branislav Kyseľ a Marko Rentka, U.S.Steel Košice, s.r.o., SK: Ten types of energy loses
12:20 - 12:40	František Helebrant ,VŠB – TU Ostrava, CZ: Process-techological activity - maintenance
12:40 - 13:00	Roman Fabian, REIMANN s.r.o., SK: ECO-nnomy in maintenance

13:00 – 14:00	Lunch
14:00 – 15:20	Information systems and maintenance support

14:00 - 15:20	Petr Přikryl, IDS Scheer ČR, s.r.o.,CZ: Maintenance, software and moderns organisation in the year 2009
14:00 - 15:20	Oldřich Kuboň, Systémy-Ratech, s.r.o. SK: ASSIK - Information system for support of quality of nuclear power stations equipment
14:00 - 15:20	Miroslav Šándor, Inseko, a.s., SK: Green initiative – innovation in EAM systems area
14:00 - 15:20	Vladimír Ščípa, Sfera, a.s., SK: Utilisation of knowledge systems in planning of energy equipment maintenance

15.20 – 15.45

Coffeee break

15.45 – 18.00

Best practices in maitnenance management

15.45 – 16.05	Jozef Tóth, Bently Nevada Slovakia s.r.o., member of GE Energy, SK: Importance of predicitve maintenance in changed economic circumstances, new trends in maintenance supprot
16.05 – 16.25	Jozsef Csiba, Hungarian State Railway, HU: International Tendencies in the Maintenance of Railway Vehicles
16.25 – 16.45	Ondrej Valent, CMMS, s.r.o.,CZ: Savings ina company by implementation of proactive predictive maintenance. Why it does not work in your company?
16.45 – 17.00	Jaroslav Zajíček, Technická univerzita v Liberci, CZ: Some fragments of RCM process
17.00 – 17.15	Ľubomír Šooš, STU SjF/ Koordinačne centrum odborneho vzdelavania, SK: Training of maintenance personnel
17.15 – 17.30	Hana Pačaiová, TU Košice, SK: New standards and their role in maintenance management
17.30 – 17.45	Miroslav Rakyta, ŽU, SjF, KPI, Žilina,SK: TPM - concept for reduction of losses and maintenance process costs
17.45 – 18.00	Vladimír Stuchlý, ŽU, SjF, KDMT, Žilina, SK: Reliability methods in creation of maintenance systems

18:00 - 19:00

SSU internal programme

19:30 - 24:00

Conference Dinner

Wednesday, 27 May, 2009

8.00 – 10.00

Predictive maintenance and diagnostics

8.00 – 8.20	Roman Richter, SLOVALCO, a.s., Žiar nad Hronom, SK: Quality, reliability and technical diagnostics of technological system in continuous operation
8.20 – 8.40	Viera Peťková, eustream, a.s., SK: Effective control of energetic equipment by „walking information“
8.40 – 8.50	Roman Jedlička , SE AE Jaslovské Bohunice, SK: Diagnostic measurements during increse of power of production equipment of Nuclear power stationV2
8.50 – 9.00	Dušan Belko, , SE AE Jaslovské Bohunice, Vladimír Magula, IBOK, a.s., SK: Repairs of sockets on HRK reactors in SE EBO<
9.00 – 9.20	Vladimír Hájek, Peter Tirinda, Bruel&Kjaer, SK: Protection and diagnostics of machines - important step in production safety improvemnt
9.20 – 9.30	Adam Bojko, ADASH, CZ: Predictive maintenance managemetn and condition monitoring of machines
9.30 – 9.40	Vladimír Oravčík, SKF Slovensko, spol. s r.o., SK: New products, new trends
9.40 – 10.00	Pavol Kováč, VTS Slovnaft, SK: Diagnostic methods for increase of operational reliability of machinery

10.00 – 10.30

Coffee break

10.30 – 12.10

Advanced maintenance techology

10.30 – 10.40	Karel Bojas, WOMA - PRAHA, CZ: Water as a tool
10.40 – 11.00	Vladislav Chvalina, KLEENTEK Slovakia, s.r.o., SK: Care for oil = resource for profit, chapter 2
11.00 – 11.20	Roman Hutta,Spirax-Sarco, SK: Effective operation of steam systems
11.20 – 11.30	Róbert Berky, Ibok, a.s., SK: Durability assessment of autoclave
11.30 – 11.40	Martin Vitásek, Ibok, a.s., SK: Welding during repairs and rennovations
11.40 – 11.50	Dušan Prieložný, GLYNWED s.r.o. Trnava, SK: Contact systems from polyethylene
11.50 – 12.10	Vladislav Hynek, Alfa Laval, s.r.o., CZ: Use of high-speed centrifuges in practice
12.10 – 12.50	Safety and special topics
12.10 – 12.20	Krzysztof Olejnik, Grzegorz Woźniak, Sławomir Cholewiński, Motor Transport Institute, PL: Managing of the safety at the sources of motor transport
12.20 – 12.30	Gabriel Nowacki, Motor Transport Institute, PL: The functional structure of The National Automatic Toll Collection System in Poland
12.30 – 12.40	Jan Kamenický,Technická univerzita v Liberci ,CZ: Is "k of n" connection really the best?
12.40 – 12.50	Josef Chudoba,Technická univerzita v Liberci ,CZ: Determination of dynamic reliability parameters of multi state systems by use of the Monte-Carlo method

12.50 – 13.00	Conference closing
13.00 – 14.00	Lunch

Thursday 28 May, 2009

Accompanying programme:

Seminar : Maintenance and safety - Hana Pačaiová, TU Košice

Workshop: Maitneance benchmarking EFNMS – harmonised indicators EN and SMRP - Juraj Grenčík, SSU / ŽU; Vendelín Iro, SSU

We look forward to meeting you again at the 10th National Forum on Maintenance 2010!
Štrbské Pleso, hotel Patria, 25 - 26 May 2010

5/26/2009 - 5/27/2009

Vysoké Tatry, Štrbské Pleso, Hotel PATRIA