National Forum on Maintenance 2015

Date

6/2/2015 - 6/3/2015

Place

Vysoké Tatry, Štrbské Pleso, Hotel PATRIA

Price

International conferenceheld under the patronage of the Slovak Ministry of Economy
PHOTODOCUMENTATION

 

General partners:
 
Main partners:
 


 

 

Partners:
 









 

 

Media partners:


 

 


      Dear friends and colleagues in maintenance,

      Below you can find short overview and photos from the fifteenth international conference National Forum on Maitnenance 2015, that took place from 2nd to 3rd June 2015 traditionally in the hotel Patria at Štrbské Pleso.
      The conference became an event bringing together maintenance managers and specialists, leading companies offering services in maintenance, representatives of wide range of industries as well as experts from academic area.

      Importance of the conference has been confirmed by permanently high numebr of domestic and foreign participants. Number of participants in this year was a record during in the whole history since the year 2000 and the lsit of participants reach the number233, out of whichho 191 from Slovakia and 44 forreigners - traditionally most from the Cedh Republic - 29, Germany and Austria by 5 and from Poland 3.
      Overview of the number of participants from the beginning in 2000 until 2015 is documented by the graph.

Overview of the numbar of participants from the beginning in 2000 until 2015

      The conference continued again in the established model of one and half day conference. On the second day afternoon there were accompanying specialised seminars. 40 presentations were on the conference programme, substantial part of them were solutions and products offered by the conference partners. The conference programme can be found in the end of the page.

      Main topic of the conference, based on proposals from the preceding year, was safety and risk in maintenance. SSU supported campaign EU OSHA - healthy workpalces without stress, which was intorduced by representative of National labour inspectorate, Ing. Laurencia Jančurová. Besides her there were 5 more presenation on teh topic with practical solutions. Beginning of the conference was dedicated to general partners of the conference: AREVA, that introduced Online Monitoring of Glass Fiber Reinforced Pipes (GRP) and AREVA Aging Management Platform. Company Klüber Lubrication introduced Repair lubrication of gear transmissions that contributes to life extension without necessity of costy repair.
      During the conference opening SSU gives incentive awards for contributions to maintenance development in Slovakia. From 2003 it is the SSU award "Maintainer of the Year“. In this yeat it was granted to two top maintenane workers: Ing. Peter Gazsi, general manager for production support in the U.S.Steel Košice, s.r.o. and Gejza Kardos, head of the department of RR and CR (Rolls Royce) in eustream, a.s.
      For the twelfth time "SSU award for master thesis" was awarded to Ing. Petronela Virostková, graduate from the SjF, TU Košice, for the diploma work entitled: „Preventive approach in process control“. Supervisor of the thesis was prof. Ing. Hana Pačaiová, PhD.

SSU Board of Management

CONFERENCE TOPICS

  1. Best practices in operation and maintenance
  2. Safety and risks in maintenance
  3. Maintenance information systems and maintenance management
  4. Innovative maintenance technologies
  5. Predictive maintenance and diagnostics

Accompanying programme3 June 2015, 14:00 - 17:00
- Seminar: Asset Management - requirements of standards and implementation in practice
- Seminar: Operative maintenance managememnt and paper-free maintenance with use of iWi
- Workshop: Maitnenance Benchmarking - European and global indicators in connection with processes

 

Professional Guarantors: Conference Preparatory Committee:
  • Václav Legát
  • Juraj Sinay
  • Peter Zvolenský
  • Michal Abrahámfy
  • Dušan Belko
  • József Csiba
  • Gabriel Dravecký
  • Katarína Grandová
  • Juraj Grenčík
  • Peter Herman
  • Jozef Hrubec
  • Vendelín Íro
  • Krzysztof Olejnik
  • Hana Pačaiová
  • Miroslav Rakyta
  • Marko Rentka
  • Vladimír Stuchlý
  • Zdeněk Votava
  • Michal Žilka

 

Conference languages: Slovak, Czech, English - translating (simultaneous during conference, consecutive at seminar).

Participants evaluation

Which sessions did you attend?
  Yes Partly No   Yes Partly No
Innovative maintenance technoligies, Part 1 56% 33% 11% Information systems and maintenance support 44% 40% 16%
Safety and risks in maintenance 55% 28% 17% Predictive maintenance and diagnostics 66% 25% 9%
Best practices in operation and maintenance 51% 36% 13% Innovative maintenance technoligies, Part 2 60% 27% 13%
Your evaluation (score: 1=excellent 5=poor):
Overal conference level 1,33 ±0,59 Conference organisation 1,22 ±0,44
Professional level of presentations 1,74 ±0,80 Conference topics selection 1,66 ±0,73
Conference venue 1,09 ±0,35 Conference date 1,30 ±0,69

 

 

 

 

The most interesting presentation

 

Pos. Name Organisation Presentation Points Number Average
1 Marián Bartoš SAG Elektrovod, a.s. Bratislava Rennovations and repairs of steel structure of high and very high voltage pillars 96 42 2,29
2 Miroslav Rakyta Žilinská univerzita v Žiline, KPI The best practices in implementing TPM and their benefits 45 20 2,25
3 Marián Bartoš SAG Elektrovod, a.s. Bratislava Operational risks and typical deffects of stee structures of distriv´bution stations in energy in the end of designed or real life time 42 15 2,80
4 Jozef Šiška Klüber Lubrication CZ, s.r.o., Brno Repair lubrication of gear transmissions 34 16 2,13
5 Ján Petko U.S.Steel Košice, s.r.o. Employee engagement in safety improvement 33 16 2,06
6 Hana Pačaiová, Gabriel Dravecký TU v Košiciach; GD project VAU as a tool for maintenance improving 31 15 2,07
7 Franz Strohmer AREVA GmbH Online Monitoring Of Glassfiber Reinforced Plastic Pipes 28 12 2,33
8 Petr Uřídil, Ladislav Antal SPM Instrument s.r.o. Brno The Shock Pulse Method and the Four Failure Stages of Rolling Element Bearings 19 10 1,90
9 Martin Vrana INSEKO, a.s. Žilina Optimizing the use of IS in the implementation and maintenance management using iWi 18 10 1,80
10 Peter Tirinda B & K, s.r.o., Bratislava Selected methods and solutions of technical diagnostic to support the machine and asset maintenance 15 9 1,67
11 Vladimír Oravčík SKF Slovensko, spol. s r.o. Laser and Maintenace 14 9 1,56
12 Marek Šeremeta LAMI KAPPA, spol. s r. o., Teplice Shaft alignment of vertical machines 11 7 1,57
13 Juraj Grenčík SSU / ŽU, SjF, KDMT, Žilina Requirements on maintenance staff qualification according to new European norm 11 6 1,83
14 Soňa Sopóci-Brchelová, Pavel Petrásek SEPS, a.s. Bratislava; TÜV Rheinland Česká republika, s.r.o. New approaches to pipelines diagnostics 10 6 1,67
15 Juraj Porubän U.S.Steel Košice, s.r.o. Conversion of optical instruments to 3D laser scanning in conditions of USSK 10 4 2,50


Video from the conference recorded by media partner ATP Journal:

Photos from the conference

Tueasday, 2 June, 2015

 

Registration of participants

Conference opening - boardfrom the left: Krzysztof Olejnik - PNTTE representative, Poland; Václav Legát - ČSPÚ chairman; Vendelín Íro - SSU vice-chairman; Juraj Grenčík - SSU chairman;, Czech Republic; Patrik Liška - representative of the Slovak Ministry of Economy; Dušan Belko - SSU vice-chairman

Conference opening - Vendelín Íro, SSU vice-chairman for organization

Conference opening - wellcome address - Václav Legát, ČSPÚ chairman and professional guarantor of the conference, Czech Republic

Conference opening - wellcome address - Krzysztof Olejnik - PNTTE (Polish Maintenance Society) BoD member, Poland

Conference opening - wellcome address - Patrik Liška - representative of the Slovak Ministry of Economy

Conference opening - participants at the congress hall

Conference opening - participants at the congress hall

Conference opening - participants at the congress hall

Conference opening - participants at the congress hall

Conference opening - participants at the congress hall

Conference opening - participants at the congress hall

SSU award "Maintainer of the year 2014" - Ing. Peter Gazsi, U.S.Steel, Košice, s.r.o. a Gajza Kardos, eustream, a.s.

SSU award "Maintainer of the year 2014" - Ing. Peter Gazsi, U.S.Steel, Košice, s.r.o.

SSU award "Maintainer of the year 2014" - Gajza Kardos, eustream, a.s.

"SSU master thesis award" - Petronela Virostková SjF TU Košice

Petronela Virostková introduced her diploma work entitled: „Preventíve apporach in process control“

Franz Strohmer, AREVA GmbH, D: Online Monitoring Of Glassfiber Reinforced Plastic Pipes

André Zander, AREVA GmbH, D: AREVA Aging Management Platform

Jozef Šiška, Klüber Lubrication Austria GmbH, A: Repair lubrication of gear transmissions

Sessions "Innovative maintenance technologies" and "Safety and risks in maintenance" were chaired by Dušan Belko

Dicussion to presentations

Dicussion to presentations

Dicussion to presentations

Laurencia Jančurová, Národný inšpektorát práce, Košice, SK: Successful management of psychosocial risks – Good practice examples

Ján Petko, U.S.Steel Košice, s.r.o., SK: Employee engagement in safety improvement

Ľubica Knoblochová, Slovenské elektrárne - Elektráreň Bohunice, SK: Application of human performance improvement in maintenance processes

Marián Bartoš, SAG Elektrovod, a.s. Bratislava, SK: Operational risks and typical deffects of stee structures of distriv´bution stations in energy in the end of designed or real life time

Jaroslav Dancák, U.S.Steel Košice, s.r.o., SK: Ensuring the repair zones of lifting equipment

Renata Hofferová, RENOMIA, s.r.o., Bratislava, SK, TomášTragan, RENOMIA, a. s. Brno, CZ: RENOMIA - your reliable and professional partner for insurance and risk management

Sessions "Best practices and maintenance management" and "Informaton systems and maintenance management" in the afteroon were chaired by Michal Žilka

Viera Peťková, eustream, a.s. Bratislava, SK: How students connect university with practice

Hana Pačaiová, TU v Košiciach, SK: VAU as a tool for maintenance improving

Libor Vylíčil, ELVAC SOLUTIONS s.r.o., CZ: Collection and use of diagnostic data in CMMS

Andrej Mellen za Ivan Gallo, East-Gate Automation s.r.o., SK: Maintenance in context Industry 4.0

Martin Vrana, INSEKO, a.s. Žilina, SK: Optimizing the use of IS in the implementation and maintenance management using iWi

Lubomír Sláma, Act-in CZ s.r.o., Brno, CZ: Integrated solution – men, machines, systems

Lukáš Chovanec, ECM System Solutions, s.r.o., Mikolajice, SK: Technical documentation managment from the maintenance perspective

Andrej Mellen za Juraj Sabaka, East-Gate Automation s.r.o., SK: PROCE55 integrates maintenance and production processes

Miroslav Rakyta, Žilinská univerzita v Žiline, KPI, SK: The best practices in implementing TPM and their benefits

Ľubomír Líška, Mirosław Gajda, INTERCERPADLO BB, s.r.o.; ANGA, SK / PL: Diamant coatings in mechanical sealings ANGA

Special guest: Marián Bartoš, SAG Elektrovod, a.s. Bratislava, SK: Rennovations and repairs of steel structure of high and very high voltage pillars


Conference dinner

 

Spoločenský večer – raut

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner

Conference dinner


 

Wednesday 3 June, 2015

Sessions "Predictive maitnenance and diagnostics" and "Innovative maintenance techologies" were chaired by Peter Herman

Petr Kolečkář, SPECTRO CS, s.r.o., CZ: Current possibilities and measurement methods of wear particles in oils

Martin Tesař, POKORNY, spol. s r. o., CZ: Causes of repeated leakages of critical flange joints

Peter Brieška, National Instruments, SK: Advanced solutions in diganostics of machines condition

Peter Tirinda, B & K, s.r.o., Bratislava, SK: Selected methods and solutions of technical diagnostic to support the machine and asset maintenance

Petr Uřídil, SPM Instrument s.r.o. Brno, CZ: The Shock Pulse Method and the Four Failure Stages of Rolling Element Bearings

Adam Bojko, ADASH, s.r.o., Ostrava, CZ: New modern diagnostic instruments for every maintenance

Marek Šeremeta, LAMI KAPPA, spol. s r. o., Teplice, CZ: Shaft alignment of vertical machines

Dicussion to presentations

Vlastimil Těšický, John Crane Slovakia, s.r.o., SK: Hydrodynamic bearings – complex maintenance and repairs

Martin Janček, OLYMPUS CZECH GROUP, s. r. o., CZ: Endoscopy inspection of wind power stations gearboxes

Vladimír Oravčík, SKF Slovensko, spol. s r.o., SK: Laser and maintenance

Juraj Porubän, U.S.Steel Košice, s.r.o., SK: Conversion of optical instruments to 3D laser scanning in conditions of USSK

Soňa Sopóci-Brchelová, Pavel Petrásek, SEPS, a.s. Bratislava; TÜV Rheinland ČR, s.r.o., SK / CZ: New approaches to pipelines diagnostics

Tomáš Turan, ALS Czech Republic, s.r.o., Praha, CZ: Oils analyses - Way to efficiency

Adrián Banász, ProCS, s.r.o., Šaľa, SK: Modernisation of oil-mechanical antipumping control of pumps in energy and chemical industry

Róbert Vaník, Henkel Slovensko spol. s r.o., SK: Loctite products for increased work safety in meintenance

Rastislav Milan, U.S.Steel Košice, s.r.o., SK: Equipment reliability of liquid iron transportation

Michal Hovanec, TU v Košiciach, SK: New trends in maintenance support with using of NFC technology

Dicussion to presentations

Dicussion to presentations

Dicussion to presentations

Dicussion to presentations

Dicussion to presentations

Conference closure - ballot of winners from returned enquiry sheets

Conference closure - 2nd prize

Conference closure - 1st prize

Conference closure - Thanks to participants and Invitation to the 16th NFM 2016



Companies' exhibitions

 

Companies' exhibitions

Firemné výstavky

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions

Companies' exhibitions


Conference accompanying events:
Workshop: Maintenance benchmarking - European and global indicators in connection with processesJuraj Grenčík, Žilinská univerzita, SjF, KDMT & SSU


Seminar: Asset Management - requirements of standards and implementation in practiceHana Pačaiová, TU v Košiciach; Gabriel Dravecký, GD Project


Seminar: Operative maintenance managememnt and paper-free maintenance with use of iWiMartin Vrana, INSEKO, a.s. Žilina


Pictures from the High Tatras 2015

Mlynická dolina valley, from the left Solisko, Štrbský štít, Patria peaks

Mlynická dolina valley

Mlynická dolina, waterfall Skok

This can be seen at Štrbské pleso

This can be seen at Štrbské pleso

This can be seen at Štrbské pleso

Štrbské pleso - evening colours


Final conference programme:

 

Tuesday, 2 June, 2015

 

7:00 - 8:30 Registration
8:30 - 9:00 Conference opening
8:30 - 8:40 Conference adresses
8:40 - 8:50 SSU award "Maintainer of the year"
8:50 - 9:00 SSU "Master thesis award"
9:00 - 10:00 Innovative maintenance technologies
9:00 - 9:15 Franz Strohmer, AREVA GmbH, D: Online Monitoring Of Glassfiber Reinforced Plastic Pipes )
9:15 - 9:30 Rainer Schmitt, Helmut Nopper, AREVA GmbH, D: AREVA Aging Management Platform
9:30 - 9:50 Jozef Šiška, Klüber Lubrication Austria GmbH, A: Repair lubrication of gear transmissions
9:50 - 10:00 Discussion
10:00 - 10:30 Coffee break
10:30 - 12:30 afety and risks in maintenance
10:30 - 10:45 Laurencia Jančurová, Národný inšpektorát práce, Košice, SK: Successful management of psychosocial risks – Good practice examples
10:45 - 11:00 Ján Petko, U.S.Steel Košice, s.r.o., SK: Employee engagement in safety improvement
11:00 - 11:15 Ľubica Knoblochová, Slovenské elektrárne - Elektráreň Bohunice, SK: Application of human performance improvement in maintenance processes
11:15 - 11:30 Marián Bartoš,SAG Elektrovod, a.s. Bratislava, SK: Operational risks and typical deffects of stee structures of distriv´bution stations in energy in the end of designed or real life time
11:30 - 11:45 Jaroslav Dancák, U.S.Steel Košice, s.r.o., SK: Ensuring the repair zones of lifting equipment
11:45 - 12:00 Renata Hofferová, RENOMIA, s.r.o., Bratislava, SK: RENOMIA - your reliable and professional partner for insurance and risk management
12:00 - 12:20 Discussion
12:20 - 12:30 Anton Gérer, Ján Minár, Zuzana Augustínová, Barbora Karchová: Introdution of magazines: ATP Journal, Strojárstvo, Tribotechnika and Řízení a údržba
12:30 - 13:30 Lunch
13:30 - 15:30 Best practices and maintenance management
13:30 - 13:45 Juraj Grenčík, SSU & ŽU, SjF, KDMT, Žilina, SK: Requirements on maintenance staff qualification according to new European norm
13:45 - 14:00 Viera Peťková, eustream, a.s. Bratislava, SK: How students connect university with practice
14:00 - 14:15 Hana Pačaiová, Gabriel Dravecký, TU v Košiciach; GD project, SK: VAU as a tool for maintenance improving
14:15 - 14:30 Libor Vylíčil, ELVAC SOLUTIONS s.r.o., CZ: Collection and use of diagnostic data in CMMS
14:30 - 14:45 Marián Hvišč, IBM Slovensko, spol. s r.o., SK: Utilization of analytics to make maintenance more effective
14:45 - 15:00 Vladislav Chvalina, KLEENTEK spol s.r.o., Praha, CZ: Current trends in diagnostics and quality of fluid lubricants
15:00 - 15:15 Juraj Petrovič, Messer Tatragas, spol. s r.o., Bratislava, SK: Modern materials need modern technical gases
15:15 - 15:30 Discussion
15:30 - 16:00 Coffee break
16:00 - 17:30 Informaton systems and maintenance management
16:00 - 16:10 Ivan Gallo, East-Gate Automation s.r.o., SK: Maintenance in context Industry 4.0
16:10 - 16:20 Martin Vrana, INSEKO, a.s. Žilina, SK: Optimizing the use of IS in the implementation and maintenance management using iWi
16:20 - 16:30 Lubomír Sláma, Act-in CZ s.r.o., Brno, CZ: Integrated solution – men, machines, systems
16:30 - 16:40 Lukáš Chovanec, ECM System Solutions, s.r.o., Mikolajice, SK: Technical documentation managment from the maintenance perspective
16:40 - 16:50 Juraj Sabaka, East-Gate Automation s.r.o., SK: PROCE55 integrates maintenance and production processes
16:50 - 17:00 Miroslav Rakyta, Žilinská univerzita v Žiline, KPI, SK: The best practices in implementing TPM and their benefits
17:00 - 17:10 Ľubomír Líška, Mirosław Gajda, INTERCERPADLO BB, s.r.o.; ANGA, SK / PL: Diamant coatings in mechanical sealings ANGA
17:10 - 17:30 Discussion
17:30 Special guest
Marián Bartoš, SAG Elektrovod, a.s. Bratislava, SK: Rennovations and repairs of steel structure of high and very high voltage pillars

18:00 - 19:00 Internal programme of SSU

19:30 - 24:00 Conference dinner

 

Wednesday, 3 June, 2015

 

8:00 - 9:30 Predictive maitnenance and diagnostics
8:00 - 8:10 Petr Kolečkář, SPECTRO CS, s.r.o., CZ: Current possibilities and measurement methods of wear particles in oils
8:10 - 8:20 Martin Tesař, POKORNY, spol. s r. o., CZ: Causes of repeated leakages of critical flange joints
8:20 - 8:30 Peter Brieška, National Instruments, SK: Advanced solutions in diganostics of machines condition
8:30 - 8:40 Peter Tirinda, B & K, s.r.o., Bratislava, SK: Selected methods and solutions of technical diagnostic to support the machine and asset maintenance
8:40 - 8:50 Petr Uřídil, Ladislav Antal, SPM Instrument s.r.o. Brno, CZ: The Shock Pulse Method and the Four Failure Stages of Rolling Element Bearingsa
8:50 - 9:00 Adam Bojko, Adash, s.r.o., Ostrava, CZ: New modern diagnostic instruments for every maintenance
9:00 - 9:10 Marek Šeremeta, LAMI KAPPA, spol. s r. o., Teplice, CZ: Shaft alignment of vertical machines
9:10 - 9:30 Discussion
9:30 - 10:00 Coffee break
10:00 - 12:00 Innovative maintenance techologies and diagnostics
10:00 - 10:10 Vlastimil Těšický, John Crane Slovakia, s.r.o., SK: Hydrodynamic bearings – complex maintenance and repairs
10:10 - 10:20 Martin Janček, OLYMPUS CZECH GROUP, s. r. o., CZ: Endoscopy inspection of wind power stations gearboxes
10:20 - 10:30 Vladimír Oravčík, SKF Slovensko, spol. s r.o., SK: Laser and maintenance
10:30 - 10:40 Juraj Porubän, U.S.Steel Košice, s.r.o., SK: Conversion of optical instruments to 3D laser scanning in conditions of USSK
10:40 - 10:50 Soňa Sopóci-Brchelová, Pavel Petrásek, SEPS, a.s. Bratislava; TÜV Rheinland ČR, s.r.o., SK / CZ: New approaches to pipelines diagnostics
10:50 - 11:00 Vladimír Nováček, ALS Czech Republic, s.r.o., Praha, CZ: Oils analyses - Way to efficiency
11:00 - 11:10 Adrián Banász, ProCS, s.r.o., Šaľa, SK: Modernisation of oil-mechanical antipumping control of pumps in energy and chemical industry
11:10 - 11:20 Róbert Vaník, Henkel Slovensko spol. s r.o., SK: Loctite products for increased work safety in meintenance
11:20 - 11:30 Rastislav Milan, U.S.Steel Košice, s.r.o., SK: Equipment reliability of liquid iron transportation
11:30 - 11:40 Juraj Glatz, Michal Hovanec, TU v Košiciach, SK: NNew trends in maintenance support with using of NFC technology
11:40 - 12:00 Discussion
12:00 - 12:30 Conference closing
12:30 - 14:00 Lunch

14:00 – 17:00 Conference accompanying events:
Seminár: Asset Management - requirements of standards and implementation in practice
  Hana Pačaiová, TU v Košiciach; Gabriel Dravecký, GD Project
Seminar: Operative maintenance managememnt and paper-free maintenance with use of iWi
  Martin Vrana, INSEKO, a.s. Žilina
Workshop: Maintenance benchmarking - European and global indicators in connection with processes
  Juraj Grenčík, Žilinská univerzita, SjF, KDMT & SSU

We are looking forward to meeting you at the sixteenth NFM 2016!
Štrbské Pleso, Hotel Patria, 31 May - 1 June, 2016