National Forum on Maintenance 2022

The 21st year of the international conference National Forum on Maintenance 2022 was held again after three years on the traditional date and at the traditional place. We present the evaluation and photo documentation from the event.

Date

5/31/2022 - 6/1/2022

Place

Štrbské Pleso, Hotel PATRIA

Thank you for participating in the National Maintenance Forum 2022 and we invite everyone to come again next year.

Date of NFM 2023: 30. - 31. 5. 2023

Venue: Štrbské Pleso, hotel Patria


Evaluation of the conference and photo documentation

 

Dear friends,

          After a forced break caused by the COVID-19 pandemic in 2020 and a successfully managed, time- and location-shifted conference in 2021 at the Holiday Inn Trnava hotel, the international conference National Forum on Maintenance 2022 took place again on the traditional date at the end of May and at the traditional location in the hotel Patria at Štrbské Pleso.

         The mission of the conference is: "To bring up-to-date information of a high professional level and create favourable conditions for the exchange of experience of experts in maintenance from Slovakia and abroad".

                                                              SSU BoD

CONFERENCE TOPICS

  • Maintenance best practices
  • Advanced maintenance technologies
  • Predictive maintenance and diagnostics
  • Special topics

Professional guarantors:

Conference Preparatory Committee::

  • Hana Pačaiová
  • Martin Pexa
  • Peter Zvolenský

 

  • Michal Abrahámfy
  • Dušan Belko
  • Peter Darvaši
  • Gabriel Dravecký
  • Katarína Grandová
  • Juraj Grenčík
  • Jan Hroch
  • Krzysztof Olejnik
  • Viera Peťková
  • Marko Rentka
  • Jan Vytřísal
  • Michal Žilka

Conference languages: Slovak, Czech, English


          The number of participants and the speakers' interest in the event confirmed the value of the verified "NFU" brand. The official list contained 225 participants, of which 180 were domestic and 45 foreign - 43 from the Czech Republic and 2 from Germany 2.

         An overview of the development of the number of participants for all conferences held from 2000 to 2022 is documented in the graph below:

         The conference program continued in the usual one-and-a-half-day conference model. The final program included 30 lectures.

          You can find the conference program at the bottom of the page after the photo documentation from the conference.

        The SSU awards were awarded at the conference. The first of them is the SSU "Maintainer of the Year" award. This year it was given Ing. Mário Pečimúth, head of maintenance and engineering at IAC Group (Slovakia) s.r.o. – Lozorno plant. The second is the SSU award for a diploma thesis. This year it was won by Ing. Rasislav Scherk, a graduate of the Industrial Engineering department from the Department of KPI, SjF, University of Žilina, for his work on the topic: "The influence of the quality of planned preventive maintenance performance on the quality of the production process", under the supervision of doc. Miroslav Rakyta.

      

Participants survey - results:

Which sessions did you attend:

 

Yes

Partly

No

 

Yes

Partly

No

Maintenance best practices

69%

22%

9%

Predictive maintenance and diagnostics II

48%

38%

14%

Maintenance best practices and inforamtion systems

45%

44*%

11%

Advanced maintenance technologies I

61%

36%

13%

Predictive maintenance and diagnostics I

61%

31%

8%

Advanced maintenance technologies II

60%

27%

13%

Your evaluation:  (score: 1= excellent,  5 = poor)

Overal level

1,36±0,60

Conference organisation

1,16±0,47

Professional level of presentations

1,42±0,76

Conference topics

1,58±0,60

Conference venue

1,05±0,28

Conference date

1,34±0,69

      The participants again evaluated the three lectures they liked the most. This year, only one lecture was not presented even once, which means that the vast majority of lectures caught the attention of at least someone. 

      The ranking of the first 12 presetations is gieven in the table below:

Rank

Name

Organization

Presentation

Total

Count

Average

1

Peter Gazsi

U. S. Steel Košice, s.r.o.

amitneancne transforamtion in USSK

83

33

2,52

2

Tomáš Vravko

AYES, s.r.o.

Smart glasses for maintenance

47

23

2,04

3

Jan Vytřísal, Petr Palatka, Pavel Petrásek

SEPS, a.s. Bratislava, GAMALUX PLZEŇ spol. s r.o.

Internal pipeline inspection with a robotic tool

40

23

1,74

4

Peter Brziak

Výskumný ústav zváračský z.z.p.o.

Possibilities of reverse engineering and additive manufacturing in demanding and time-limited repairs in industry

22

9

2,44

5

Mário Pečimúth

IAC Group (Slovakia) s.r.o.

Creation and innovation of the maintenance process for the purpose of effective evaluation of employees through specialized applications from INSEKO a.s.

20

10

2,00

6

Igor Ubreži

ECOFIL, spol. s.r.o.

Monitoring and controlling oil purity according to Industry 4.0 requirements

19

10

1,90

7

Luboš Rozkošný

INNOMIA a.s.

3D printing of metals and plastics for machinery and equipment maintenance

18

9

2,00

8

Libor Mareš

Pokorny industries s.r.o.

Influences on the Flange tightness

14

8

1,75

9

Milan Lúčan

U. S. Steel Košice, s.r.o.

Maintenance transformation - IT support in transformation processes

14

7

2,00

10

Přemysl Kuchař

MERO ČR, a.s.

Inspection methods of transit crude oil pipeline

12

6

2,00

11

Markéta Šimkovičová

Garlock GmbH

Implementation of the new TA Luft standard from December 1, 2021 into industry

12

6

2,00

12

Ronald Landefeld

Framatome AG

Approach to Optimization of Refueling Outages and Maintenance

12

5

2,40


 Photo documentation from the conference

Tuesday, May 31, 2022

Registration

Conference opening - conference chair, from the left: Dušan Belko - SSU vice chairman, Jan Hroch -  ČSPÚ CEO, Gabriel Dravecký -  SSU chairman,  Peter Gazsi - general manager for production support, U.S.Steel Košice, spol s.r.o., general parter ofthe conference, and Juraj Grenčík - SSU vice chairman

Conference opening - Juraj Grenčík

 

Conference opening - Jan Hroch -  ČSPÚ CEO

Conference opening - participants

Conference opening - participants

Conference opening - participants

Conference opening - participants

Conference opening - SSU award "Maintainer of the year 2021" - Mário Pečimúth, maintenance and engineering manager at  IAC Group (Slovakia) s.r.o. – Lozorno plant

Conference opening - SSU award "Maintainer of the year 2021" - Mário Pečimúth, maintenance and engineering manager at  IAC Group (Slovakia) s.r.o. – Lozorno plant

Conference opening - SSU award "Maintainer of the year 2021" - Mário Pečimúth, maintenance and engineering manager at  IAC Group (Slovakia) s.r.o. – Lozorno plant

SSU "Diploma thesis awards" - Rastislav Scherk

Rastislav Scherk - presentaion of diploma thesis on teh topic: "The influence of the quality of planned preventive maintenance performance on the quality of the production process"

Conference opening - Gabriel Dravecký,  SSU chairman- Synergy of maintenance theory with practice and its benefit for members of the Slovak Maintenance Society

Gabriel Dravecký - Synergy of maintenance theory with practice and its benefit for members of the Slovak Maintenance Society

Peter Gazsi, U. S. Steel Košice, s.r.o. - Maintenance transformation in USSK

Peter Gazsi, U. S. Steel Košice, s.r.o. - Maintenance transformation in USSK

Peter Gazsi, U. S. Steel Košice, s.r.o. - Maintenance transformation in USSK

Milan Lúčan, U. S. Steel Košice, s.r.o. - IT support in transformation processes

Discussion

Discussion

Discussion

Discussion

Conference hall

Conference hall

Conference hall

Mário Pečimúth, IAC Group (Slovakia) s.r.o. - Creation and innovation of the maintenance process for the purpose of effective evaluation of employees through specialized applications from INSEKO a.s.

Ronald Landefeld, Framatome AG - Approach to Optimization of Refueling Outages and Maintenance

Boris Pajdušák, Jacobs Slovakia s.r.o. - Experience with operation and maintenance of equipment for waste management from activated components of decommissioning V1 NPP in Jaslovské Bohunice

Tomáš Stopka, eustream, a.s. - ES 25 MW modification used for natural gas transport and engine parameters verification

Přemysl Kuchař, MERO ČR, a.s. - Inspection methods of transit crude oil pipeline

Přemysl Kuchař, MERO ČR, a.s. - Inspection methods of transit crude oil pipeline

Discussion

Discussion

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Company exhibitions

Coffee break with Company exhibitions

Coffee break s firemnými výstavkami

 

Markéta Šimkovičová, Garlock GmbH - Implementation of the new TA Luft standard from December 1, 2021 into industry

Tomáš Vravko, AYES, s.r.o. - Smart glasses for maintenance

Adam Bojko, Adash spol. s r.o. - Adash – modern diagnostic instrumentation

Peter Tirinda, B & K s.r.o. - Protection, condition monitoring and vibration diagnostics of machines

Petr Semotam, Siemens s.r.o. - Practical benefits of predictive maintenance and Condition Monitoring. Siemens diagnostic service case

David Suchý, Siemens s.r.o. - Practical benefits of predictive maintenance and Condition Monitoring. Siemens diagnostic service case

Igor Ubreži, ECOFIL, spol. s.r.o. - Monitoring and controlling oil purity according to Industry 4.0 requirements

Jozef Líška, HYDAC, s.r.o. - Remote fault diagnosis in hydraulic systems

Petr Kolečkář, SPECTRO CS , s.r.o. - Possibilities of chemical analysis of elements in tribotechnical applications

Conference dinner

Wednesday,  June 1, 2022

Peter Brziak, Výskumný ústav zváračský z.z.p.o. - Possibilities of reverse engineering and additive manufacturing in demanding and time-limited repairs in industry

Jan Vytřísal, SEPS, a.s. - Internal pipeline inspection with a robotic tool

Libor Mareš, Pokorny industries s.r.o. - Influences on the Flange tightness - case studies

Michal Páca, RUML EMES s.r.o. - How monitoring condensate drains can help reduce CO2 emissions?

Igor Neczli, Din- Technik spol. s r.o. - We help partners to produce smoothly and continuously without downtime and with higher efficiency

Discussion

Discussion

Session chairwoman Katarína Grandová, KCOV SjF STU, SSU BoD member

Session chairwoman and author of the photographs

 

Ján Kavec, PNEUNÁRADIE AC, s.r.o. - A properly tightened joint will last a functional life

Martin Mačanga, Hilti Slovakia spol. s r.o. - Hilti - prefabricated tailor-made steel structures

Róber Vaník, Henkel Slovensko spol. s r.o. - Bonding in an instant in maintenance

Marek Šimášek, OEZ Slovakia spol. s.r.o. - The right choice of protection in industry and energy management

Juraj Špánik, Admasys SK, s.r.o. - 3D Printing and 3D scanning – an indispensable maintenance helper

Luboš Rozkošný, INNOMIA a.s. - 3D printing of metals and plastics for machinery and equipment maintenance

Discussion

Soňa Sopóci, Affida - How to start a business not only in difficult times

Technical support - AVACO Media

Conferecne closing with a prize draw for completing the survey

Ukončenie konferencie - poďakovanie za účasť a pozvánka na NFU 2023

 

 


Conference programme:                                                                      


May 31, 2022 - Tuesday
7:30 Registration      
8:30 Conference opening
     
 

Opening addresses

     
  SSU award "Maintainer of the year"
  SSU award "For the master thesis"
  Gabriel Dravecký SSU SK Synergy of maintenance theory with practice and its benefit for members of the Slovak Maintenance Society
9:00 Maintenance best practices
9:00 Peter Gazsi U. S. Steel Košice, s.r.o. SK

Maintenance transformation in USSK:  
a. Key roles inmaintenance transforamtion process
b. Sustainability of world class maintenance in USSK 

9:30 Milan Lúčan U. S. Steel Košice, s.r.o. SK IT support in transformation processes
10:00 Coffee break
     
10:30 Maintenance best practices and information systems
10:30 Mário Pečimúth IAC Group (Slovakia) s.r.o. SK Creation and innovation of the maintenance process for the purpose of effective evaluation of employees through specialized applications from INSEKO a.s.
10:55 Ronald Landefeld Framatome AG D

Approach to Optimization of Refueling Outages and Maintenance

11:20 Boris Pajdušák, Peter Tatranský Jacobs Slovakia s.r.o. SK Experience with operation and maintenance of equipment for waste management from activated components of decommissioning V1 NPP in Jaslovské Bohunice
11:40 Tomáš Stopka eustream, a.s.  SK ES 25 MW modification used for natural gas transport and engine parameters verification
12:00 Přemysl Kuchař MERO ČR, a.s. CZ Inspection methods of transit crude oil pipeline
12:30 Lunch      
13:30 Dedicated time to visit company exhibitions
14:30 Predictive maintenance and diagnostics I    
14:30 Markéta Šimkovičová Garlock GmbH SK Implementation of the new TA Luft standard from December 1, 2021 into industry
14:50 Tomáš Vravko AYES, s.r.o. CZ Smart glasses for maintenance
15:10 Adam Bojko Adash spol. s r.o. CZ Adash – modern diagnostic instrumentation
15:30 Peter Tirinda B & K s.r.o. SK Protection, condition monitoring and vibration diagnostics of machines
15:50 Petr Semotam, David Suchý Siemens s.r.o. CZ Practical benefits of predictive maintenance and Condition Monitoring. Siemens diagnostic service case
16:10 Coffee break      
16:40 Predictive maintenance and diagnostics II
16:40 Igor Ubreži ECOFIL, spol. s.r.o. SK Monitoring and controlling oil purity according to Industry 4.0 requirements
17:00 Jozef Líška HYDAC, s.r.o. SK Remote fault diagnosis in hydraulic systems
17:20 Petr Kolečkář SPECTRO CS , s.r.o. CZ Laboratory equipment for tribotechnical analysis
18:00 Coffee break      
19:00

Conference dinner


June 1, 2022 - Wednesday
8:20 Advanced maintenance techologies I
8:20 Peter Brziak Výskumný ústav zváračský z.z.p.o. SK Possibilities of reverse engineering and additive manufacturing in demanding and time-limited repairs in industry
8:40 Jan Vytřísal, Petr Palatka, Pavel Petrásek SEPS, a.s.; JettyRobot s.r.o.;GAMALUX PLZEŇ spol. s r.o. SK, CZ Internal pipeline inspection with a robotic tool
9:00 Libor Mareš Pokorny industries s.r.o. CZ Influences on the Flange tightness - case studies
9:20 Michal Páca RUML EMES s.r.o. CZ How monitoring condensate drains can help reduce CO2 emissions?
9:40 Miloš Lipka Din - Technik spol. s r.o. SK We help partners to produce smoothly and continuously without downtime and with higher efficiency
10:00 Coffee break      
10:30 Advanced maintenance techologies II
10:30 Ján Kavec PNEUNÁRADIE AC, s.r.o. SK A properly tightened joint will last a functional life
10:50 Martin Mačanga Hilti Slovakia spol. s r.o. SK Hilti - prefabricated tailor-made steel structures
11:10 Róber Vaník Henkel Slovensko spol. s r.o. SK Bonding in an instant in maintenance
11:30 Marek Šimášek  OEZ Slovakia spol. s.r.o. SK The right choice of protection in industry and energy management
11:50 Juraj Špánik Admasys SK, s.r.o. SK 3D Printing and 3D scanning – an indispensable maintenance helper
12:10 Luboš Rozkošný INNOMIA a.s. CZ 3D printing of metals and plastics for machinery and equipment maintenance
12:30 Špeciálna téma      
12:30 Soňa Sopóci Affida SK How to start a business not only in difficult times
12:50 Conference closing
13:00 Lunch      

 

    

General partner
Main partners
 
Partners      
 
 
 
 
 
   
Main media partner  
Media partners